Author Archives: kucza83

Arduino Workbench

I decided to make my own little Arduino Workbench

And here is the result!

All you need is:

A 3mm ABS sheet
3x nuts and bolts
3x spacers
2x Breadboards
9x pads for the bottom
And your favorite Arduino (Mine is from SeeedStudio)

I have created a Arduino Workbench PDF so it is easy to make your own!

Get to work!

1 Comment

Posted by on August 28, 2012 in Uncategorized


Tags: , , , ,


Here is my new little robot BennyBlue…

I’ll made my own Android app in Google’s App Inventor.. I was quite easy actually.

It’s controlled serial by receiving characters over my RN-42 Bluetooth module. Yeah, and that’s about it..

Hope you enjoy it! Like it? Comment are appreciated

The source code are available.

BennyBlue is the Android App Inventor source code

Benny_Blue_v1.pde is the Arduino source code

Love to see new robots inspired by BennyBlue 🙂



Posted by on November 14, 2011 in BennyBlue


Tags: , , , , ,

Arduino Mood Lamp Shield

I recently decided to make a little shield for a RGB mood lamp. I already had the parts lying around so i started.

Arduino compatible board
1 Bare PCB
5 PIN headers
4 Small wires
1 Power plug
1 ULN2004A Darlington Array
1 8 pin Sockets Solder Tail
3 Resistors – 4.4 Ohm/4.4 Ohm/8.2 Ohm
1 5V wall adapter – Minimum 1A

As you probable can see, there are some additional resistors on the PCB. Thats because I hadn’t the necessary resistors. So i putted 2 x 2.2Ohm resistors in series to make up for the 4.4 Ohm resistor, and I putted a 10Ohm and a 47 Ohm resistor in parallel to make up for the 8.2 Ohm resistor.

I made a schematic so you can see how the wiring goes on

I found some source code from other cool RGB projects, and i decided to post them here:
Candle Light Effect
On/Off RGB

Happy Building…

Leave a comment

Posted by on May 16, 2011 in Arduino Mood Lamp Shield


Tags: , , , , , , , , , , ,